Coating Thickness Gauge LM10-Others-LCNDT Corp.,

Coating Thickness Gauge LM10

LM10 Series-Spcification:

Measuring principle:

Magnetic Method(Fe): Measuring the thickness of non-magnetic coating on steel, iron and other ferromagnetic metal substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, phosphate coating, chromium, zinc, aluminum, tin and cadimium, etc.

Eddy Current Method(NFe): measuring the thickness of non-conductive coating on copper, aluminum, stainless steel and other non-ferromagnetic substrates, e.g. painting, varieties of anti-corrosion coating, powder spraying, plastic, rubber, synthetic material, oxide film and phosphate film, etc.

Probe Type		P1	P2	P3	P4
Measuring Principle		Magnetic Method	Eddy Current Method	Magnetic Method	Magnetic Method
Measuring Range(μm)		0~1250	0~1250	0~10000	0~400
Low Range Sensitivity(μm)		0.1	0.1	10	0.1
Tolerance	One-point Calibration(μm)	±(3%H+1)	±(3%H+1.5)	±(3%H+10)	±(3%H+1)
Tolerance	Two-point Calibration(μm)	±((1～3)%H+1)	±((1～3)%H+1.5)	±((1～3)%H+10)	±((1～3)%H+0.7)
Testing Condition	Min. Curvature Radius(mm)	1.5	3	10	1
	Min. Measuring Surface(mm)	7	5	40	3
	Min. Substrate Thickness(mm)	0.5	0.3	2	0.2
Display	High Contrast Segment Liquid Crystal Display (LED Backlight)
Statistics Function	N, MAX, MIN, MEAN and STD.DEV
Calibration	One-Point Calibration and Two-Point Calibration
Working Temperature	-10℃~+50℃, -20℃ in special requirement
Auto Power-off	Auto off after 3 minutes of inactivity
Power	2 AA size batteries, low-voltage indication function
Weight	200g including batteries
Size	149mm×73mm×32mm (H×W×D)

Standard Configurations	Optional Configurations
LM10 Coating Thickness Gauge	P2 probe
P1 Probe	P3 probe
Calibration foils	P4 probe
Fe Zero plate	Calibration foils
Sealed Carrying Case	Fe Zero plate
1.5 Volts Alkaline Batteries	Al Zero plate
Operating Manual	Rubber Sheath
Packaging List, Certification